 |
Earwires & Components |
 |
Plated Lever Back Ear Wires Plated lever back ear wires with open ring.
$1.00 each pair or $3.99 six pair pack.
Prod73
Stainless and Plated Earwires These earwires are stainless, stainless silver-plated, or stainless gold-plated.
Six pair pack is $1.00
Thirty-six pair pack is $3.25 ($1.00 + 2.25).
Beading Hoops - 47mm These beading hoops have one wire left open so you can put beads directly onto the wire. Insert the wire into the top and pinch with the pliers to close them. They can easily be made smaller. For a pair, hold two in your hand with the open ends even and cut them off with wire cutters, then reshape them. The hoop shown on your right has been altered by cutting off about 1/2" of wire.
Sold by the pair or by the twelve-pair pack.
Comfort Backs Gold or silver colored, stainless steel lined (against your ear) comfort backs for posts. They seem to fit almost all posts. Someone once had a pair of earrings from South America with a very thick post. The backs were too tight until we stuck an awl in the hole and made it a tiny bit bigger. I love it when we can make it work!
Sold by the dozen pair in gold or silver, choose below.
Screw Back Hoop Gold color screw back hoop earrings. Lots of holes use to sew beads to, or make little cloth slipcovers to sew to and glue on.
These are vintage uncirculated stock.
We have 26 pairs in stock.
Clip Back Pierced Look Earrings Clip back with ring for hanging earrings. Looks like a pierced earring. I use these myself, not having pierced ears, and they work pretty well. Available in gold color or shiny silver color.
Sold by the pair.
Prod213
Copper Niobium Earwires Hyper-allergenic niobium earwires that have been copper colored. One style has a small copper bead, the other has a coil. The copper color is dark. If you are trying to match a lighter shade, the style with the beads usually blends in nicely.
Sold by the pair per style, see option below.
Prod260
Clip Earring with 4mm 1/2 Ball Gold plated ear clip with 1/2 ball and hanging loop.
Sold in a six pair pack.
Prod674
Japanese Sen Coin A/C - Replica 3/4" Lead-free, copper plated pewter. Approximately 3/4" in diameter. It has a top hole and three holes at the bottom to use for dangles. The picture shows the front and back of one coin. Beautifully made and high quality. Replica of a Japanese coin.
Sold individually.
15 in stock.
Prod753
Japanese Sen Coin Replica A/S 3/4" Top drilled with three holes for dangles.
Sold individually.
Prod762
7 in stock.
Three-Ring Earring Hoops - Gun metal Roughly 5/8" high, 1/2" across and 1/16" thick.
Sold by the pair.
Prod763
Three-Ring Earring Hoops - Gold Plated Roughly 5/8" high, 1/2" across and 1/16" thick.
Sold by the pair. Prod764
Three-Ring Earring Hoops - Silver Plated Roughly 5/8" high, 1/2" across and 1/16" thick.
Sold by the pair. Prod765
Three-Ring Earring Hoops - Copper Plated Roughly 5/8" high, 1/2" across and 1/16" thick.
Sold by the pair. Prod766
Lever Back Ear Wires - Plated Silver plated lever back ear wires with open ring.
Sold by the 12 piece (6 pair) pack.
Prod850
|
|
|
|
|
||||
|
All material copyrighted © 2007-2010 Beads!tm |