 |
Bails |
 |
Sterling Bail with Design - Small Soft sterling silver pinch bail with engraved design. It measures about 1/2" high and is for a pendant that has a hole about 1/4" down from the edge. Two 1/8" prongs fit into the pendant hole which can be as small as a 22 ga. wire.
Sold by the piece.
Beaver Tail Glue on Bail (Sterling) Sterling silver "beaver tail" bail. This one glues on. The tail has a 3/8" long glue surface, the bail has a 3/32" rise to accommodate the piece and the bail has a 1/8" clearance for a cord. Overall it is 5/8" long. All measurements are approximate. Shown on a standard 40mm x 30mm cab in the photo.
Bail sold by the piece. Stone sold separately.
Prod299
Sterling Up Eye Sterling 4mm cup-shaped bell for glueing 4mm to 6mm beads in place, with a loop for hanging at the top. The inside diameter of the loop is 3mm. The whole piece is 7mm high.
Sold individually.
Sterling Bail - Small and Plain Sterling silver bail, 7/16" (10mm) high, with inside prongs that measure a scant 1/8" (2.5mm) on both sides. The prongs are 1/16" (2mm) above the end and will hide a 3mm hole.
Sold individually.
Prod304
Sterling Silver Chain Link Look Bail Small sterling bail that looks like chain. It has two holes to string into that will work for a separator bar for two seedbead strands and an open loop at the bottom to hang a pendant or charm. It is about 7/16" (11mm) long.
Sold individually.
Center Scored Bail 5/16" x 3/16" Dainty. Will accommodate a 2mm cord. The hanging hole is open and looks like it will take up to 20 ga. jump ring.
Sold individually.
Prod810
Set Stones in this Bail - Sterling Approximately 1/2" by 3/16" sterling bail that you can set stones in. The manufacturer recommends Swarvoski flat-back rhinestones 16 pt., 12 pt., and 9 pt. For those of us, including me, who don`t know a pt. from a hole in the ground, the top hole is a scant 1/8", the middle is about 3/32", and the smallest is about 1/16". The loop in back will take up to a 3mm diameter cord or chain. The hanging loop is open and will accommodate a 18 ga. jump ring.
Sold individually.
Prod809
"Vine" Bail - Large and Sterling Fold-over with prongs on both inside surfaces. It measures 5/8" high by 3/8" across the top.
Sold individually. Pendant is not included.
Prod662
Gold Filled Large Bail (1/2") Your piece must have a 1/8" opening to accommodate this bail. It is heavy 1/2 round and very strong. Closed it is about 1/2" high. The inside diameter is 3/8" at the top.
Prod730
Gold Filled Clip Type Bail 7/16" Your piece needs a least 1/8" opening to accommodate this bail. The inside diameter at the top is about 1/8" and it is 7/16" top to bottom.
Sold individually.
Prod731
Four Leaf Sterling Bail 9/16" x 7/16" Back loop will accommodate a 3mm cord or chain and the hanging loop will take up to a 14 ga. jump ring.
Sold individually.
Prod811
Open work Sterling Bail 9/16" x 1/4" Back loop will accommodate a 3mm cord or chain and the hanging loop will take up to a 14 ga. jump ring.
Sold individually.
Prod812
|
|
|
|
|
||||
|
All material copyrighted © 2007-2010 Beads!tm |